A1 / ADIBOT

Fully Autonomous UV-C Disinfection Robot

More rooms, less time, safer care

Name: ADIBOT A1
Brand: TGR

Able to navigate fully on its own using a suite of advanced sensors, the A1 analyzes real-time data to chart the most efficient disinfection path, adapting seamlessly to dynamic spaces such as operating rooms, patient rooms, or entire units. Operators can choose to customize its route, splitting or adding disinfection points for better coverage—without extending the total session.

With an 8-hour runtime, the A1 is the most productive and reliable choice for round-the-clock disinfection. On average, the A1 can complete a disinfection program in a standard patient room within 13 minutes*, allowing it to handle up to 36 rooms before needing a recharge.

Times reflect a UV-C dose of 100 mJ/cm², sufficient for a 4-log reduction of C. diff. Duration may vary with room configuration, target organism, and reduction goal.

Features

Charges Faster, Lasts Longer

Disinfect more rooms on a single charge with 8+ hours of continuous use with a 4-hour charge time.

8+

Hours of Runtime

You Have Options

Three easy operating modes seamlessly integrate into your disinfection protocols. Click here to learn more below.

3

Modes of Operation

Disinfection Backed by Science

8 upper and 8 lower shatterproof UV-C lamps ensure top-to-bottom light coverage. See The Science.

16

Lamps

Industry-Leading Sensors

LiDAR, RGB-D ToF camera, ultrasonic sensors, infrared sensors, and an anti-collision pressure sensor.

10+

Navigation Sensors

Never Get Stuck

Capable of crossing thresholds as high as 1.27cm and navigate spaces as narrow as 76.2cm.

Practical Mobility

Push handles make it easy to move, with a balanced design that prevents tipping.

Keep Everyone Safe

PIR sensors and safety sign pause disinfection if a perimeter breach is detected.

Real-Time Response

Instantly detects equipment, monitors, or environmental changes and adjusts to obstacles within seconds.

Cumulative UV-C Dosage in Action

Even when targeting a single disinfection point, the A1’s UV-C light reaches surrounding surfaces, increasing overall exposure through cumulative dosage. The simulation below shows the A1 autonomously navigating from point to point in a standard patient room. Watch as the robot distributes 100 mJ/cm² of UV-C energy to all surfaces within this 85-square-meter room (280-square-feet), rapidly and precisely achieving at least a 99.99% reduction of C. diff.

FAQ

What are the 3 different operating modes when using the A1?

The A1 has three operating modes:

Use Map: Plan and optimize sessions by setting key disinfection points within a pre-mapped room. The A1 will autonomously navigate to each point, calculating the most efficient path in real time to ensure thorough coverage.

AI Auto Explore: In this mode, the A1 uses its AI algorithms to scan the room, generate a map, and set evenly distributed disinfection points based on grid setting and room size.

On-the-Spot: This stationary mode delivers focused, single-cycle disinfection where needed, operating in the same way as manual UV-C devices.

How does UV-C disinfection work? Is it safe?

Is there a way to manage reporting and track disinfection tasks?

Does the robot need internet connectivity to operate?

What kind of training is available?

What is the life cycle of the UV-C lamps? When will I need to replace the lamps?

What happens if I need help with the robot?

What is the warranty policy for the A1?

Support at Every Step

With the most expansive support infrastructure in the industry, our Tech Ops team is always ready to ensure every operator is confident and capable.